How to Use a Climbing Tree Stand?

Get Ready To Climb!

How to Use a Climbing Tree Stand

So, how to use a climbing tree stand? If you’re a hunter who values your well-being, this is the post for you. Choosing a decent climbing tree stand is just winning half the battle. Utilizing the tree stand impacts how quickly and easily you can hunt where you may find the freshest signs of prey.

That begs the question, do you know how to use a tree stand? If you’re new to this, climbing tree stands will be a rather sophisticated piece of equipment. So it’s understandable, given how complex the structure is.

The concept of wandering around with tree stands and utilizing them does not appeal to most hunters. If you are in this category, we’re here to teach you how to correctly use the stands so you can perform your job more efficiently. After going through this tutorial, we are sure that you will shed your unfavorable attitude towards climbing tree stands.

How to Use a Climber Tree Stand?

Let us walk you through the critical aspects of using a climbing treestand.

Choosing The Right Climbing Tree Stand

While purchasing a tree stand, consider the placement. Consider a more robust stand if you’re going to utilize it in an area prone to erosion. Before everything else, safety should always be the most important consideration.

Make sure you choose a tree stand most suited to your needs to prevent unwanted harm. Identifying the terrain in the immediate area can help you determine which stand is best for your hunting needs. As a result, features such as weight, size, and setup convenience are essential to keep in mind.

Choosing The Right Tree

Once you’ve found the ideal tree stand, the following step is to locate the perfect tree to climb. There are many factors to consider when deciding what kind of tree to climb, including the deer’s line of vision.

For the stand to function effectively, it uses the laws of physics of leverage. To this end, you must choose a good tree that is compatible with the demands of your stand. Short, thin, and smooth bark trees like beech trees aren’t likely to be strong enough to meet your requirements. Instead, you’ll be looking for a healthy, live tree with rough bark, such as maple and oak trees with sturdy trunks. It’s also a good idea to choose a straight tree with few or no lower limbs that you’ll have to cut down to do the safe climb.

Look at the tree’s breadth and how much of its width it carries up, such as pine trees. Avoid picking a large tree at the base that narrows as you go higher to avoid difficulties while climbing. As a starting point, such trees are more likely to impede you from reaching your hunting height.

Search and once you’ve found a few good trees, mark them with detachable identifiers so you can remove them when you’re done.

Choosing the Correct Angle

It’s critical to determine whether the tree has branches before proceeding since they provide a significant obstacle in your path. The branches should not obstruct your view, and the tree should not make it challenging to secure your position. When deciding on the best angle, visualize how you’ll position your stand against the tree.

Your angle will be steeper if you place your stand higher. You may need to cut down some branches if required. Unfortunately, you can’t see well because of this. As a result, we’re advising you to use a more stealthy approach to hunting. Choosing a tree around the same height from bottom to top can help you avoid modest upward angle shifts when climbing the tree.

Securing the Upper and Lower Sections

Now that you’ve got your tree stand set up, it’s time to start climbing. To guarantee that your ascent and descent are safe, you’ll need to take a few precautionary precautions. First, check whether the parts of your stand are harnessed at the top and bottom of the tree.

It prevents the bottom piece from falling to the ground if it slips during ascending. Do not let yourself be left stranded in the branches of a tree, unable to get aid.

The stand should be tested a few feet from the ground to ensure all components are in place. Secure your climbing stand in position and make sure that its teeth dig into its bark before fastening it to prevent mishaps.

Fixing the Feet to Stand

Climbing treestands must have both the bottom platform and the top portion securely fastened to prevent feet from detaching during the ascent. It stops your feet from sliding off the tree stand and causing it to fall. It makes a big difference when you pull up the tree stand’s bottom limbs. Tree stands may have a metal bar or safety strap to keep your feet safe when climbing.

Attach Yourself to the Tree

Before you begin your ascent, you must attach yourself to the tree. If your tree stand does break, this prevents you from falling. You can also use a full-body safety harness to secure yourself to a tree after reaching the height you prefer for hunting. Never forget to keep tethered to the tree.

Start Climbing

Now that you’ve double-checked that everything is in order, you may start climbing your chosen tree. The procedure of climbing a tree varies for different climbing stands. As soon as you’ve reached the proper height level, put on your hunting gear and practice your hunting technique. You’re all set to go on the hunt.

Which Method Is Recommended for Climbing a Tree to Enter an Elevated Stand?

We recommend using a fall-arrest device (safety harness). Free climbing is a bizarre idea as hunters often fall from their tree stands when ascending or descending the tree. When your feet are above the ground, utilize a FAS with a securely-fitted full-body harness.

How to Set Up a Climbing Tree Stand?

How to Set Up a Climbing Tree Stand?
How to Set Up a Climbing Tree Stand?

You need to know how to set up a tree stand for climbing properly. Adhere to the steps outlined below to get started.

Select a Suitable Site And Tree Stump

Make sure you know where your target is coming from and heading to before setting up your tree stand. It is crucial since it will give you a rough idea of the perfect tree to put up your climbing tree stand.

Choose a tree stump that can withstand your weight and is in good condition. The surface of the tree stump should also be rough since a smooth stump might easily lead to a fall, resulting in an injury.

Select a Leafy Area

For the greatest results, you should look for a place surrounded by trees. It may make it simpler for you to remain undetected. Also, in an accident, the leaves might be employed to protect against extreme damage. It should not be viewed as a curative step but rather as a precaution if an accident happens.

While hunting an animal, it will be difficult to detect if you are hiding in thickets of trees. Your prey options will expand as a result of this.

Install the Tree Stand

It is a critical step, and failing to do it correctly may result in a dangerous fall from the tree stand. Therefore, to prevent the tree stand from toppling, ensure that you securely fasten the stump to the stand.

You may leave some room for mobility when ascending your tree stand. Finally, ensure it’s secure enough to hold your weight when you’re at the top.

Choose a Hanger Belt

Climbing treestands need a sturdy hanging belt to hold you in place. It helps keep you from falling from the tree when using a hanger belt. A hanger belt will help you keep your balance when perched on a tree. Keeping the hanger belt in a tight, usable position can help prevent injuries from friction-induced loosening or cutting.

Climbing requires multi-tasking; therefore, a decent hanger belt will make it easier to pull up the tree stand and the ladder with one hand.

Ensure You Have Proper Tree Stand Equipment

Ensure you have the proper climbing gear before you leave the ground and ascend to the tree’s summit with a belt around your waist and the tree’s trunk. In the event of a slippery ascent, the belt will provide support.

When you reach the summit, be careful to put your bags and cameras in a good spot so that they don’t obstruct your view of the destination.

Organize Your Possessions at The Tree Stand

Double-check that your hunting supplies are organized when you’re in the tree stand. Place yourself in a good spot and wait for prey. To get a clear view of the action, be mindful of where you put your cameras and other gear. Then, arrange your hunting weapons at the top of your stand, where they are conveniently accessible. You should always have a first aid kit with you in minor accidents.

How to Carry a Climbing Tree Stand?

Hunting might include lugging a lot of gear around for a single day’s hunt, particularly if you’re deer hunting from a tree and need to bring a climbing tree stand. Climbing tree stands often have straps and are light enough to carry on your back, but how can you simultaneously carry a tree stand and a backpack? Here are some solutions.

To ensure a proper weight distribution, we recommend connecting the backpack to the tree stand rather than vice versa. The most frequent method of connecting your setup is to get nice treestand straps, which can be quickly looped around your stand and tied around your bag securely.

Using a bungee cord is a more cost-effective method of holding things in place. Bungee cords often have enough stretch to keep a tree stand and a backpack snugly together on your back and enough rope to connect additional items like weapons, climbing poles, etc.

Consider the fanny pack or a waist bag option if you can fit all of your gear into a single piece of luggage. The disadvantage of these bags is that they cannot hold as much gear as a backpack.

In a sturdy game cart, you can also use a game cart to haul all your equipment, such as tree stands, backpacks, sticks, rope, rifles, and other hunting gear; however, they are a pricey option.

Are Climbing Tree Stands Safe?

Climbing tree stands are usually safe, even though a platform attached to a tree via a rope or bolt isn’t very stable.

A surprising number of hunter mishaps don’t occur as a result of stand failure, but rather because the hunter makes some unsteady movements which lead to a fall without wearing a safety harness.

While in a tree stand, use a second or backup safety harness to avoid serious injury.

What Type of Tree Stand Should You Avoid Using?

We do not recommend using homemade stands and permanent stands composed of boards fastened or bolted to trees. Permanent tree stands irritate those who appreciate the outdoors but do not hunt. They also cause severe tree damage and, as a result of weathering, rotting, and tree growth, become dangerous over a short period. Furthermore, large game animals see permanent stands as dangerous and avoid them frequently. Big game hunters prefer unobtrusive portable ones that are easy to transport.

How to Hunt With a Climbing Tree Stand?

How to Hunt With a Climbing Tree Stand?
How to Hunt With a Climbing Tree Stand?

When it comes to hunting from a climbing tree stand, there is no one-size-fits-all method. Instead, it’s all up to you and the environment you choose to go hunting.

Before using tree stands to hunt deer successfully, you’ll need a lot of scouting knowledge and a few seasons of practice. You’ll have the best odds at snagging a trophy buck in the center of a dense forest. The more trees you have surrounding you, the better your stand’s security and camouflage will be.

An important tip is that you must not assume that something has changed by your presence while hunting from tree stands (e.g., cut branches). If feasible, use existing animal paths without altering them too much, as game trails are crucial when selecting where to set up your stand.

Instead of waiting for a deer to wander by, hunters who like to hunt from tree stands should stay out all day. A lot of movement is necessary while hunting from a treestand, and you must be alert.

To be safe while hunting from a tree stand, you need to be aware of your surroundings. Prepare for the worst-case scenario by planning how you’ll get out of it. With these tips in mind, you’ll be a pro!

Final Words – How to Use a Climbing Tree Stand?

Climbing tree stands are great for mobile hunters who want to find the best shooting positions, and they make it possible to shoot from a safe distance, and your target won’t know what struck them. A well-placed climber stand is essential to a successful hunting trip.

Treestands save you a lot of time and effort when hunting because you don’t have to waste time racing after your prey and missing it more often than not. And now that you know how to use them, we are sure you will try one on your next hunting trip.

Happy hunting!

Leave a Reply